Name: CONTADOR DIG. 6D.ENT. 4-30VDC. 100-240V SAL. R.
SKU: 5537
Price: 1.00 PEN
Availability: InStock

CONTADOR DIG. 6D.ENT. 4-30VDC. 100-240V SAL. R.

Cod.: GE4-P61A

		GE series- Batch function – NPN/PNP input selectable – Pre-scale setting – Display decimal points up to 4 digits – Off set setting

Suffix code

Model	Code					Information
GE	–					Digital Counter
Dimension	3					96 × 48 mm
	4					48 × 48 mm
	6					72 × 36 mm
	7					72 × 72 mm
Type		P				Pre-set counter
Type		T				Total counter (only for indication)
Displayable digit			4			4 digits (9999) ※ GE3 and GE7 are not selectable
Displayable digit			6			6 digits (999999)
Setting level (excludes the total counter)				1		1^st level setting
Setting level (excludes the total counter)				2		2^nd level setting
Power supply voltage					A	100 – 240 V a.c. 50 – 60 ㎐
Power supply voltage					D	24 – 60 V d.c / a.c 50 – 60 ㎐

Specification

Model		GE6-P4	GE6-P6	GE6-T6	GE4-P4	GE4-P6	GE4-T6
W × H × D (mm)		72 × 36 × 86			48 × 48 × 85
Type		Preset		Display	Preset		Display
Display digit		4Digits 2Stages	6Digits 2Stages	6Digits 1Stages	4Digits 2Stages	6Digits 2Stages	6Digits 1Stages
FND Hight		PV : 11 mm SV : 8 mm			PV : 11 mm SV : 8 mm
Function		Out-counter setting & Indication(Exception : Indication)			Out-counter output & constant output
		PNP / NPN Input selection, built-in switch			Twin timer(On/Off Time separate setting)
		Dual counter function (CP1+CP2)			Flicker MODE 99.99 sec setting
		Prescale function			Key Lock function
		OFFSET setting function(Standard value when reset)			P.V storage function when power off
Counting speed & Input		1 / 30 / 1 K / 10 Kcps, Contact, Non-contact
Reset		External reset signal width 0.1 ms / 1 ms / 20 m sec selectable
Input type		CP1, CP2, RST, RST.B (TOTAL is exception) 4 Input
		[H]Level 4 – 30 V d.c [L]Level 0 – 2 V d.c NPN / Internal full-up by PNP setting / full-down resistance connection(4.7 ㏀)
Power voltage		1. 100 V – 240 V d.c / a.c 50 – 60 ㎐(± 10%)
		2. 24 V – 60 V d.c / a.c 50 – 60 ㎐(± 10%)
Consumption power		About 12 VA(220 V a.c 60 ㎐)
Power supply to sensor		+12 V d.c (Voltage fluctuation rate : Max. ±5%) 200 mA Max.
Control output	RELAY1	1a (250 V a.c 3 A)		–	1c (250 V a.c 3 A)		–
	RELAY2	1c (250 V a.c 3 A)			1c (250 V a.c 3 A)
	TR1/TR2	NPN open collector 30 V d.c 100 mA Max. (Refer to terminal structure)
Dielectirc strength		–
Ambient temperature & humidity		-10 – 50 ˚C 30 – 85 % R.H. (Without condensation)
Protection structure		IP65(Front)

Model		GE3-P6	GE3-T6	GE7-P6	GE7-T6
W × H × D (mm)		96 × 48 × 100		72 × 72 × 87
Type		Preset	Display	Preset	Display
Display digit		6Digits 2Stages	6Digits 1Stages	6Digits 2Stages	6Digits 1Stages
FND Hight		PV : 13 mm SV : 10 mm		PV : 13 mm SV : 10 mm
Function		Out-counter setting & Indication(Exception : Indication)		Out-counter output & constant output
		PNP / NPN Input selection, built-in switch		Twin timer(On/Off Time separate setting)
		Dual counter function (CP1+CP2)		Flicker MODE 99.99 sec setting
		Prescale function		Key Lock function
		OFFSET setting function(Standard value when reset)		P.V storage function when power off
Counting speed & Input		1 / 30 / 1 K / 10 Kcps, Contact, Non-contact
Reset		External reset signal width 0.1 ms / 1 ms / 20 m sec selectable
Input type		CP1, CP2, RST, RST.B (TOTAL is exception) 4 Input
		[H]Level 4 – 30 V d.c [L]Level 0 – 2 V d.c NPN / Internal full-up by PNP setting / full-down resistance connection(4.7 ㏀)
Power voltage		1. 100 V – 240 V d.c / a.c 50 – 60 ㎐(± 10%)
		2. 24 V – 60 V d.c / a.c 50 – 60 ㎐(± 10%)
Consumption power		About 12 VA(220 V a.c 60 ㎐)
Power supply to sensor		+12 V d.c (Voltage fluctuation rate : Max. ±5%) 200 mA Max.
Control output	RELAY1	1a (250 V a.c 3 A)	–	1c (250 V a.c 3 A)	–
	RELAY2	1c (250 V a.c 3 A)		1c (250 V a.c 3 A)
	TR1/TR2	NPN open collector 30 V d.c 100 mA Max. (Refer to terminal structure)
Dielectirc strength		–
Ambient temperature & humidity		-10 – 50 ˚C 30 – 85 % R.H. (Without condensation)
Protection structure		IP65(Front)